SKJZ4800 Livestock And Poultry Small Feed Plant

Technological characteristics and introductions:

• RM receiving and cleaning process: Granules and powder material will be put into the production line separately though two inlet, the granules will be screened and cleaned to remove impurities by pre-cleaner, then remove the iron before it go into the hammer mill, the powder material should be cleaned in advance.

• Grinding process:  adopts FDSP's tear circle hammer mill which can make both coarse grinding and fine grinding, the feeder is combined together with the pre-cleaner which can clean the material and also feeding into the hammer mill, variable frequency control, evenly feeding and equipped with pulse filter. Mechanical induct discharging. The process is simple and with low cost, it is suitable for small capacity and multi type of material's grinding.

  Grinding machine: hammer mill SFSP568-Ⅰwith power 30KW, output: 3-5t/h

• Mixing process:there is pre-mixing bin upper the mixer which can make the feeding continuously  when mixer working, the mixed material can go into the pre-pelleting bin and mesh feed bins separately to meet the requirement for producing mesh feed and pellet feed at same time.

  Mixing equipment: double shaft paddle mixer SHSJ1 with 11kw, 500kg/P, homogeneity CV≤5%

• Pelletizing process: adopt one pellet mill with single conditioner which is suitable for normal poultry feed and ruminant feed production. the material go into the cooler directly after pellet mill, then go into the crumbling and screening system through bucket elevator, manual packing at last.

  Pelletizing equipment: pellet mill SZLH32 with 37kw, output: 2-5t/h.( ¢3.5 normal broiler feed formula)

• Cooling equipment: counter flow cooler SKLN1.5 with output 3-4t/h

• Crumbler: SSLG15x80 with output 2-3t/h, it can crumble the large feed pellets into small pellets to produce small chicken grow seedling feed. the crumbler is designed with by pass system so the material can be go into the screener though by pass when no need to use crumbler.

• Screening equipment: plan rotary screener SFJH80×2C with capacity 4-6t/h

• Auxiliary system: liquid adding system could adding oil into the mixer to improve feed palatability. Air compressing system is used to supply compressed air for pneumatic components.

The main equipment section
Number	Description and type	Qty	Picture
1	Hammer mill SFSP568-II Power 37KW, output: 3-5t/h	1
2	Mixer SHSJ1 Power:11kw 500kg/P output:3-4t/h homogeneity CV≤5%	1
3	Pellet mill SZLH350 Power:55kw output:3-4t/h.	1

The process can be optimized according to different customer needs:

• Considering the small capacity demand, Instead of powder material cleaning system designed in this feed set, we choose manual pre-cleaning, but customer could require to add this cleaning system based on needs

• There is mesh feed bins and pellet feed bins both in feed set, if customer do not need the mesh feed we can remove it.