SKJZ3800 Livestock And Poultry Small Feed Plant

Technological characteristics and introductions:

• RM receiving and cleaning process:

      Granules and powder material will be put into the production line separately though two inlet, the granules will be screened and cleaned to remove impurities by pre-cleaner, then remove the iron before it go into the hammer mill, the powder material should be cleaned in advance.

• Grinding process:  adopts FDSP's tear circle hammer mill which can make both coarse grinding and fine grinding, the feeder is combined together with the pre-cleaner which can clean the material and also feeding into the hammer mill, variable frequency control, evenly feeding and equipped with pulse filter. Mechanical induct discharging. The process is simple and with low cost, it is suitable for small capacity and multi type of material's grinding.

       grinding machine: hammer mill SFSP568-Ⅰwith power 22KW, output: 2-3t/h

• Mixing process:there is pre-mixing bin upper the mixer which can make the feeding continuously  when mixer working, the mixed material can go into the pre-pelleting bin and mesh feed bins separately to meet the requirement for producing mesh feed and pellet feed at same time.

       Mixing equipment: double shaft paddle mixer SHSJ0.5 with 5.5kw, 250kg/P, homogeneity CV≤5%

• Pelletizing process: adopt one pellet mill with single conditioner which is suitable for normal poultry feed and ruminant feed production. the material go into the cooler directly after pellet mill, then go into the crumbling and screening system through bucket elevator, manual packing at last.

       Pelletizing equipment: pellet mill SZLH32 with 37kw, output:2-3t/h.( ¢3.5 normal broiler feed formula)

• Cooling equipment: counter flow cooler SKLN2.5 with output 3-4t/h

• Crumbler: SSLG15x80 with output 2-3t/h, it can crumble the large feed pellets into small pellets to produce small chicken grow seedling feed. the crumbler is designed with by pass system so the material can be go into the screener though by pass when no need to use crumbler.

• Screening equipment: plan rotary screener SFJH80×2C with capacity 4-6t/h

The main equipment section
Number	Description and type	Qty	Picture
1	Grinding machine: SFSP568-Ⅰhammer mill  Power 22KW, output: 2-3t/h	1
2	Mixing equipment:  SHSJ1 mixer Power:11kw, 500kg/P homogeneity CV≤5%	1
3	Pelletize equipment: SZLH32 Pellet mill   Power: 37kw, output:2-2.5t/h.	1

The process can be optimized according to different customer needs:

• Considering the small capacity demand, Instead of powder material cleaning system designed in this feed set, we choose manual pre-cleaning, but customer could require to add this cleaning system based on needs

• There is mesh feed bins and pellet feed bins both in feed set, if customer do not need the mesh feed we can remove it.