Analysis on the working process of complete feed equipment

Feeding has many advantages. Farmers have a large demand for output, and a single feed machine is not enough, so a complete set of feed equipment is needed. Now I will give you a brief introduction to the working process of the complete set of feed equipment.

The complete set of feed equipment has everything from the crushing of raw materials to the cooling of finished pellets. First is the self-priming drum mill, which can crush foodstuff materials. The discharge port of the crusher is connected with the feed port of the mixer, and the crushed raw materials directly enter the mixer; the mixer has another feed port, which does not need to be crushed. The raw materials of the machine can enter the mixer from this feed port, and the uniformly mixed raw materials in the mixer are conveyed to the silo by the screw feeder; the mixer is to mix the materials batch by batch and is not continuous. If you want to continuously produce the whole line , Here you need a silo, there is a small feeder below the silo, which conveys the material to the pellet machine at a uniform speed. The pellet machine saves electricity when feeding at a constant speed, and the wear of the grinding disc and the roller is slow; the pellet machine The pellets produced are transported to the cooling machine through a chain conveyor, and the cooled finished pellets can be used directly. This is the process of the entire feed equipment.