Jiangsu Liangyou Zhengda Co., Ltd is a professional enterprise engaged in steel silo equipment and storage engineering technology research, development, design, manufacturing and related products sales & service. Steel silo engineering could be applied in: food industry, feed industry, oil industry, building materials industry, brewing industry and port industry. FDSP is specialized in design, manufacture, installation for both domestic and foreign helix silo and bolt silo project.
Introduction about bolt silo:
Fabricated by good quality hot-dip galvanized steel sheet(mass of Zn coat could be: 275g/㎡、350g/㎡、450g/㎡), adopt full automatic corrugated plate production line. The diameter of bolt silo could varied from φ2.75m toφ27.5m, height of straight part could varied from 1.12m to 20.16m, the storage volume could varied from 11m³ to 13333m³.
Temperature measuring system, ventilation system, indicator level system, circulation fumigation system inside the silo could be optional according to customer's need.
Based on the carried material, the silo could be divided into: maize steel silo, soybean steel silo, wheat steel silo, barley steel silo, sorghum steel silo, soybean meal steel silo, sawdust steel silo, biomass pellet steel silo. Also we can customized flour steel silo, cement steel silo, building materials steel silo;
Based on the hopper type, the silo could be divided into: concrete flat bottom steel silo, concrete cone hopper steel silo, steel structure support steel silo(single silo capacity should less than 1500T) .
2-1000T wheat steel silo storage project
The technological characteristics are as follows:
1、The main materials in silo are wheat, the silo type is the bolt silo with diameter ￠10.08m, the height of the straight part is 15.68m, and supported by the steel structure.
2、 The main process: unloading-cleaning-storage-discharging
1) unloading process is single loading, the grizzly cannot carry the truck, dumping hoper is equipped with de-dusting system to improve the working condition.
2)cleaning process is equipped with vibration screener to clean by vertical suction tube, the capacity is 50TPH
3)storage process: the capacity for inlet is 50TPH, there is temperature measuring and ventilation system inside the silowhich could control the food condition.
Features of the engineering process design:
(1) equipped with vibration cleaning sifter specially used for cleaning wheat and paddy;
(2) Supported by steel structure. For silos of 1000T and below, we will recommend our customer to choose silo with steel structure support reduce the overall cost (including the civil construction cost of the customer)
(3) When design the silo, the ventilation screen is designed to be detachable and easy to replace, so as to keep the air duct unobstructed and the good ventilation effect, effectively control the grain situation in the silo;
(4) the silo bottom is all steel cones.
For different projects and different customer requirements, the process will be also different, the following could be options during the process design:
(1) cleaning system (this part can be removed if the raw materials are clean);
(2) ventilation and temperature measuring system (if the raw materials are relatively dry, and the storage time in the silo is less than 7 days in winter and less than 4 days in summer, this part can be removed);
(3) in this process design, the unloading is one-sided, which can be designed as two sides unloading according to customer requirements to improve the unloading capacity;
(4) the silo changing system (if the storage time in the silo exceeds 60 days in winter and 30 days in summer, the warehouse changing system shall be considered);
(5) the base of silo bottom can be designed as flat concrete bottom type or conical bottom type according to the requirements;
(6) customers can choose helix silo or bolt silo according to their own needs.
Other products in the same category: